SigenStor BAT 6.0

Item number: C00669

Guarantee: 10 years

SigenStor BAT 6.0 is a compact yet powerful LiFePO₄ battery module for Sigenergy's modular energy storage system. It has been developed for residential and small commercial applications where reliable operation, long service life, high energy density, and flexible expandability are of paramount importance. In the SigenStor system, BAT 6.0 modules can be configured into multi-module energy storage systems with up to six modules under one controller, with IP66 protection for both indoor and outdoor installation.

Key benefits

• LiFePO₄ chemistry for high safety and long cycle life
• Five-level battery safety protection at cell, module, and system levels
• High energy density and compact design
• IP66 protection for outdoor installation
• Module-level SoH balancing for combined operation of new and older battery modules
• Modular, combinable design with simple installation
• Passive, natural convection cooling with fanless, silent operation
  

Performance characteristics – module

• Battery type: LiFePO₄
• Cell capacity: 314 Ah
• Cycle life: 10,000 cycles
  ● Nominal energy storage capacity per module: 6.02 kWh
• Usable energy storage capacity: 5.84 kWh
• Depth of discharge (DoD): 100%
• Maximum charging/discharging power: 3,000 W
• Peak power (10 seconds): 4,500 W
• Module weight: 62 kg
• Module dimensions (W × H × D): 767 × 270 × 265 mm
  
  

System configuration and capacity

• System configuration range: 1–6 SigenStor BAT 6.0 modules
• Maximum system-level energy storage capacity: ~36 kWh
• Installation method: free-standing or wall-mounted design
• Cooling mode: natural convection
  
  

General system information

• Storage temperature: −25 to +60 °C
• Operating temperature: −20 to +55 °C
• Relative humidity: 5–95%
• Maximum operating altitude: 4000 m
• Protection: IP66
• Installation method: floor-standing or wall-mounted design
• System-level communication: CAN
  
  

Compatibility

• Communication to the system controller: CAN (via SigenStor BC unit)
• Compatible inverters:

– SigenStor EC inverter series

– Sigen Hybrid SP2 / TP2 inverter series

Standards and compliance

SigenStor BAT 6.0 complies with relevant international safety and performance standards:

• IEC/EN 60730-1
• UN 38.3
• IEC/EN 62619
• IEC/EN 63056
• IEC/EN 62477