Sigen PV 100M1-HYB

Item number: C00691

Warranty: 5 years

The Sigen PV 100M1-HYB is a hybrid inverter with a rated power of 100 kW from the Sigenergy Sigen Hybrid Inverter series, designed for higher-power solar systems and battery energy storage. The device supports 0 ms switching to backup power (without load interruption) and 150% overload capacity for 10 seconds, which is advantageous for consumers with high starting currents and dynamic loads. Multiple units can be connected via Energy Gateway, making the system flexibly scalable, while the DC-coupled microgrid design supports simpler configuration and more efficient energy flow.

Key product benefits

• 0 ms switchover to backup power supply
• 150% overload capacity for up to 10 seconds for smooth device startup
• Connection of multiple units via Energy Gateway (expandable in the kW–MW range)
• DC-coupled microgrid solution for more efficient system design
• IP66 protection for outdoor applications

DC input (PV)

• Maximum PV input power: 200,000 Wp
• Maximum DC input voltage: 1100 V
• Nominal DC input voltage: 600 V (380/400 Vac) or 720 V (480 Vac)
• Starting voltage: 180 V
• MPPT voltage range: 160–1000 V
• Number of MPPT: 8
• Number of PV strings per MPPT: 2
• Maximum input current per MPPT: 40 A
• Maximum short-circuit current per MPPT: 60 A

DC input (battery)

• Battery module compatibility: SigenStack BAT 12.0
• Battery controller compatibility: SigenStack BC M2-0.5C-BST / SigenStack BC M2-1C-BST
• System configuration: 4–21 units
• Maximum charging power: 110,000 W
• Maximum discharge power: 110,000 W
• Maximum operating current: 180 A

AC output (mains operation)

• Nominal output power: 100,000 W
• Maximum output apparent power: 110,000 VA
• Maximum effective output power (cosφ = 1): 110,000 W
• Nominal output current @380 Vac: 151.9 A
• Nominal output current @400 Vac: 144.9 A
• Nominal output current @480 Vac: 120.3 A
• Maximum output current @380/400 Vac: 167.1 A
• Maximum output current @480 Vac: 132.4 A
• Nominal output voltage: 380 / 400 / 480 Vac, 3F+N+PE
• Nominal mains frequency: 50 / 60 Hz
• Power factor: 0.8 capacitive ~ 0.8 inductive
• Teljes áramharmonikus torzítás (THDi): < 3%

AC output (backup operation)

• Nominal output power: 100,000 W
• Maximum output apparent power: 110,000 VA
• Peak power (10 s): 150,000 W
• Nominal output voltage: 380 / 400 / 480 V, 3F+N+PE
• Nominal output frequency: 50 / 60 Hz
• Power factor: 0.8 capacitive ~ 0.8 inductive
• Feszültségharmonikus torzítás (THDv): < 3%
• Standby power switchover interruption time: 0 ms

Impact

• Maximum efficiency: 98.3%
• European efficiency: 98.0%

Protection

• DC reverse polarity protection
• Insulation monitoring
• Residual current monitoring
• Arc Fault Circuit Interrupter (AFCI)
• AC overcurrent / overvoltage / short circuit protection
• Type II DC/AC surge protection
• Anti-islanding protection

General information

• Dimensions (W / H / D): 1110 / 668 / 348 mm
• Weight: 110 kg
• Storage temperature range: -40 ~ 70 °C
• Operating temperature range: -30 ~ 60 °C
• Relative humidity: 0-100%
• Maximum installation altitude: 5,000 m (power reduction above 4,000 m)
• Cooling: intelligent airflow cooling
• Protection: IP66
• Communication: WLAN / Fast Ethernet / RS485 / Sigen CommMod (4G/3G/2G)

Standards

• IEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2