DEYE SUN-6K-SG05LP1-EU-AM2-P

Item Number: C00606

Warranty: 5 years / 10 years
The warranty period depends on the final installation location

DEYE SUN-6K-SG05LP1-EU-AM2-P

The DEYE SUN-6K-SG05LP1-EU-AM2-P is a single-phase hybrid inverter designed for the coordinated operation of solar power systems and battery energy storage. It is a good choice for systems where increasing self-consumption, flexible energy management, and support for grid-connected or off-grid operation are important. The device features a color touchscreen LCD display, IP65 protection, AC connection capability, and 6-period battery charge/discharge settings, and also supports energy storage from a diesel generator.

Main advantages

• 6 kW nominal AC power
• Single-phase hybrid operation for solar power systems and battery energy storage
• Support for lead-acid and lithium-ion batteries
• Up to 135 A maximum charge and discharge current
• 2 MPPT / 1+1 string configuration
• AC connection for retrofitting an existing solar power system
• Connecting up to 16 inverters in parallel in grid-connected and off-grid systems
• Support for multiple batteries in parallel
• 6 programmable charge/discharge periods
• Support for energy storage from a diesel generator
• Color touchscreen LCD display
• IP65 protection
• Smart air cooling
• GPRS / WiFi / Bluetooth / 4G / LAN monitoring (optional)

Main technical data

• Rated AC active power: 6000 W
• Max. AC input/output apparent power: 6600 VA
• Peak power in island mode: twice the rated power, 10 s
• Power factor range: from 0.8 capacitive to 0.8 inductive
• Power connection: L+N+PE

Battery specifications

• Battery type: lead-acid or lithium-ion
• Battery voltage range: 40–60 V
• Max. charging current: 135 A
• Max. discharge current: 135 A
• Li-ion charging strategy: automatic adaptation to the BMS
• Number of battery inputs: 1

PV string input data

• Max. PV input power: 12,000 W
• Max. PV input power: 9600 W
• Max. PV input voltage: 500 V
• Starting voltage: 125 V
• MPPT voltage range: 150–425 V
• Rated PV input voltage: 370 V
• Max. operating PV input current: 18 A + 18 A
• Max. PV short-circuit current: 27 A + 27 A
• Number of MPPT controllers / number of strings: 2 MPPT controllers / 1+1 strings

AC input/output data

• Rated AC input/output voltage/range: 220/230 V; 0.85Un–1.1Un
• Rated mains frequency / range: 50 Hz (45–55) / 60 Hz (55–65)
• Rated AC input/output current: 27.3 / 26.1 A
• Max. AC input/output current: 30 / 28.7 A
• Max. continuous AC current (grid → load): 40 A
• Áramharmonikus torzítás (THDi): <3%
• DC betáplálási áram: <0,5% In

Impact

• Max efficiency: 97.6%
• European efficiency: 96.5%
• MPPT efficiency: >99%

Protection

• DC polarity reversal protection
• AC output overcurrent protection
• Heat protection
• AC output surge protection
• AC output short-circuit protection
• DC Component Monitoring
• Overvoltage-induced load shedding protection
• Ground Fault Current Monitoring
• Arc Fault Circuit Interrupter (AFCI) – optional
• Network Monitoring
• Protection against islanding
• Earth fault detection
• DC input switch
• DC Connector Insulation Impedance Monitoring
• Residual Current Detection (RCD)
• Surge protection level: Type II (DC), Type II (AC)

Communication and monitoring

• Communication interface: RS485 / RS232 / CAN
• Monitor mode: GPRS / WiFi / Bluetooth / 4G / LAN (optional)
• Display: color touchscreen LCD

General information

• Operating temperature: -40 – +60 °C
• Power reduction: above 45 °C
• Permissible relative humidity: 0–100%
• Permitted installation altitude: 2,000 m
• Zajszint: <30 dB
• Protection class: IP65
• Inverter topology: non-isolated
• Overvoltage category: OVC II (DC), OVC III (AC)
• Enclosure dimensions (W×H×D): 330 × 580 × 232 mm
• Weight: 24.9 kg
• Cooling: intelligent air cooling

Standards and network compatibility

• Network standards: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105
• Safety / EMC: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2