Sigen EVAC 7 4G T2SH WH

Item number: C00694

Warranty: 3 years

The Sigen EV AC Charger 7 kW is a single-phase AC electric car charger with a rated power of 7 kW and a Type 2 socket, suitable for indoor and outdoor installation (IP65, IK10). It supports charging scheduling, charging from surplus solar energy, and fast charging, and dynamic load management is available to prevent overload (Sigen Power Sensor required). Installation can be simplified with multiple cable entry options (bottom/top/rear), and dynamic tariff and Sigen AI mode are supported for smarter timing.

Technical data

• Nominal charging power: 7 kW
• Nominal output voltage: 220–240 V
• Network connection: 1 phase + N + PE (1W+N+PE)
• Output current range: 6–32 A
• Nominal AC frequency: 50/60 Hz
• AC power cable cross-section range: 2.5–6.0 mm²
• Vehicle connection: Type 2 socket with touch protection lock 

Protection and security

• Integrated RDC-PD fault current detection: AC 30 mA + DC 6 mA
• Flame resistance rating: UL94-5VB
• Safety protections: OVP, UVP, OCP, OTP
• PEN protection: supported
• Random charging delay: supported
• Ground fault protection: supported
• Surge protection: supported
• Grounding system: TT, TN, IT

Treatment, communication, integration

• Protocol: RS485, Modbus RTU
• Communication: 4G / WLAN / Fast Ethernet
• Identification: RFID card / application / Auto-charge (without authentication)
• Feedback/control: LED indicator light/application
• Measurement: external meter with RS485 / integrated meter IC
• OCPP protocol: OCPP 1.6J ED 2

Smart charging features

• Smart Schedule: scheduling of charging time, frequency, and operating mode; switching between PV surplus charging and fast charging
• PV Surplus Charging: EV charging from PV surplus; with "Battery boost power" priority setting and "Battery cut-off SOC" setting
• Fast Charging: the system draws power from both the grid and PV simultaneously for the fastest charging possible; Battery Boost Charging is also supported
• Dynamic load management: supported (Sigen Power Sensor required)
• Phase change: supported
• PV surplus charging with third-party inverter: supported (Sigen Power Sensor required)

General information

• Dimensions (W / H / D): 234 / 384 / 139 mm
• Weight (case B / case C): 4.5 / 6.4 kg
• Storage temperature range: –40 to +70 °C
• Operating temperature range: –30 to +55 °C
• Relative humidity range: 5–95%
• Max. operating altitude: 4000 m
• Cooling: natural convection
• Protection class: IP65
• Installation: wall mountable
• Application environment: outdoor / indoor
• Készenléti sajátfogyasztás: < 3,6 W
• Cable entries: bottom, top, and rear

Standards and compliance

• CE compliance
• Relevant standards: IEC 61851-1/IEC 61851-21-2, IEC 62196-2, IEC 62955, IEC 60364-7-722, IEC 61439-7, IEC 61000-6-1/-2/-3/-4