Sigen Hybrid 3.0 TP2

Item number: C00651

Guarantee: 10 years

The Sigen Hybrid 3.0 TP2 is a three-phase hybrid inverter with a nominal output power of 3.0 kW from the Sigen hybrid inverter product family.

The device has a battery-ready design for future expansion; its slim design reduces installation requirements; its fanless construction supports quiet operation; and its IP66 protection rating allows for worry-free use.

Key benefits

• Battery-ready design – for future expansion
• Slim design – smaller installation requirements
• Fanless design – efficient yet quiet operation
• IP66 protection – carefree use
• Outstanding inverter efficiency: max. 98.0%, European efficiency 97.0%
• SigenStor compatibility – SigenStor BC and SigenStor BAT series (1–6 modules/controllers)
• Extensive communication: WLAN, Fast Ethernet, RS485, Sigen CommMod (4G/3G/2G)
• Natural convection cooling
• Low nighttime power consumption and noise level: ≤ 5 W nighttime power consumption, ≤ 29 dB
• Wall-mountable design
• 4000 m maximum operating altitude

Technical data

DC input (PV side)

• Maximum PV power: 6000 W
• Maximum DC input voltage: 1100 V
• Nominal DC input voltage: 600 V
• Starting voltage: 180 V
• MPPT voltage range: 160–1000 V
• Number of MPPTs: 2
• Number of PV strings per MPPT: 1
• Maximum input current per MPPT: 16 A
• Maximum short-circuit current per MPPT: 22 A

AC output – mains power supply

• Nominal output power: 3000 W
• Maximum apparent power: 3300 VA
• Nominal output current: 4.6 A
• Maximum output current: 5.1 A
• Nominal output voltage: 220/380, 230/400, 240/415 V (3W/N+PE)
• Network frequency: 50/60 Hz
• Power factor: 0.8 capacitive – 0.8 inductive
• Áramharmonikus torzítás (THDi): < 3%

Impact

• Maximum efficiency: 98.0%
• European efficiency: 97.0%

Battery connection and compatibility

• Battery controller models: SigenStor BC
• Battery module models: SigenStor BAT series
• Number of modules per controller: 1–6
• Battery module voltage range: 600–900 V

Peak performance

• Peak power (10 s): 4500 W

Built-in protection

• DC reverse polarity protection
• Insulation supervision
• Residual current monitoring
• Arc fault protection circuit breaker
• AC overcurrent/overvoltage/short circuit protection
• Type II DC/AC surge protection
• Protection against islanding

General information

• Dimensions (W / H / D): 475 / 568 / 99 mm
• Tömeg: < 17 kg
• Storage temperature range: -40 to 70 °C
• Operating temperature range: -30 to 60 °C
• Relative humidity range: 0% – 95%
• Maximum operating altitude: 4000 m
• Cooling: natural convection
• Protection level: IP66
• Communication: WLAN / Fast Ethernet / RS485 / Sigen CommMod (4G/3G/2G)
• Installation: wall mountable
• Nighttime consumption: ≤ 5 W
• Noise level: ≤ 29 dB