SigenStor EC 12.0 TP

Item number: C00638

Guarantee: 10 years

The SigenStor EC 12.0 TP is the most powerful three-phase hybrid inverter in the Sigenergy TP series, designed to serve large industrial and high-consumption business systems with a nominal output of 12.0 kW. The system provides full energy storage and uninterruptible backup operation within a single control unit.

The intelligent EMS energy management system continuously optimizes production, storage, and consumption. The equipment is capable of delivering up to 150 percent power in island mode, and with the help of Sigen Gateway, switching takes place in less than 0 ms.

Key benefits

• High-performance three-phase hybrid operation
• Integrated intelligent EMS control
• 150 percent peak performance in backup mode
• 0 ms switching time using Sigen Gateway
• Up to 98.5 percent maximum inverter efficiency
• 4 MPPT inputs for maximum solar efficiency
• 1–6 SigenStor BAT battery modules can be connected
• IP66 protection for outdoor installation
• Full remote monitoring via WiFi, Ethernet, RS485, and 4G, 3G, 2G connections

DC input solar side

• Maximum PV power 19,200 W
• Maximum DC input voltage 1100 V
• Nominal DC input voltage 600 V
• Starting voltage 180 V
• MPPT voltage range between 160 and 1000 V
• Number of MPPTs: 4
• Number of strings per MPPT 1
• Maximum input current per MPPT 16 A
• Maximum short-circuit current 20 A per MPPT
  
  

AC output power supply to the network three phases

• Nominal output power 12,000 W
• Maximum apparent power 13,200 VA
• Nominal output current 18.2 A
• Maximum output current 20.0 A
• Nominal output voltage 380 and 400 V (3W + N + PE)
• Network frequency 50 and 60 Hz
  
  
• Power factor between 0.8 capacitive and 0.8 inductive
• Current Harmonic distortion below 2 percent
• Maximum efficiency of 98.5 percent
• European efficiency 97.3 percent

Backup island operation output

• Peak power 18,000 W for 10 seconds
• Nominal output voltage 380 and 400 V (3W + N + PE)
• Nominal frequency 50 and 60 Hz
• Power factor between 0.8 capacitive and 0.8 inductive
• Voltage distortion below 2 percent
• Switchover time 0 ms Using Sigen Gateway
  
  

Battery connection

• Compatible battery SigenStor BAT series
• Number of connectable modules: 1–6
• Battery voltage range between 600 and 900 V

Built-in protection features

• DC reverse polarity protection
• Insulation supervision
• Residual current monitoring
• Arc fault protection AFCI
• AC overcurrent, overvoltage, and short-circuit protection
• Type II DC and AC surge protection
• Island operation protection anti-islanding

General information

• Dimensions 700 × 300 × 260 mm
• Weight 36 kg
• Operating temperature between –30 °C and +60 °C
• Storage temperature between -40 °C and +70 °C
• Relative humidity between 0 and 100 percent
• Cooling Intelligent active air cooling
• Protection level IP66
• Communication WLAN, Fast Ethernet, RS485, Sigen CommMod 4G 3G 2G

Standards and compliance

• IEC EN 62109-1
• IEC EN 62109-2
• IEC EN 61000-6-1
• IEC EN 61000-6-2