Deye SUN-30K-SG02HP3-EU-AM3
Item Number: C00853
Warranty: 5 years / 10 years, depending on the installation location and the manufacturer's warranty terms
Deye SUN-30K-SG02HP3-EU-AM3
The Deye SUN-30K-SG02HP3-EU-AM3 is a three-phase, 30 kW hybrid inverter designed for high-performance solar and energy storage systems. The unit operates with a high-voltage lithium-ion battery and supports battery energy storage, AC connection to existing solar systems, and the integration of diesel generators as power sources. The model supports 100% asymmetric phase loading, parallel operation of up to 10 inverters, parallel use of multiple batteries, and 6 periodic battery charge/discharge settings.
Main features
100% asymmetric output: supported, per phase
AC Connection: Eligible for Subsidies for Expanding an Existing Solar Panel System
Parallel Operation: Up to 10 inverters connected to the grid and for off-grid operation
Battery expandability: supports the use of multiple batteries in parallel
Diesel Generator Support: Storage of energy generated by diesel generators is supported
Scheduled battery management: 6 charge/discharge cycles can be set
Display: LCD + LED
Monitoring: GPRS / WiFi / Bluetooth / 4G / LAN (optional connectivity)
Technical data
Battery specifications
Battery type: lithium-ion
Battery voltage range: 160–700 V
Maximum charging current: 75 A
Maximum discharge current: 75 A
Lithium-ion Battery Charging Strategy: Automatic BMS Integration
Number of battery inputs: 1
PV Input Data
Maximum PV input power: 60,000 W
Maximum PV input power: 48,000 W
Maximum PV input voltage: 1000 V
Starting voltage: 180 V
MPPT voltage range: 150–850 V
Rated PV input voltage: 600 V
Maximum operating PV input current: 36 + 36 + 36 A
Maximum input short-circuit current: 54 + 54 + 54 A
Number of MPP trackers / number of strings per MPP tracker: 3 / 2 + 2 + 2
AC input/output data
Rated AC input/output active power: 30,000 W
Maximum AC input/output apparent power: 33,000 VA
Rated AC input/output current: 45.5 / 43.5 A
Maximum AC input/output current: 50 / 47.9 A
Maximum continuous AC current from the mains to the load: 80 A
Peak power in island mode: 1.5 times the rated power, for 10 seconds
Power factor adjustment range: 0.8 capacitive – 0.8 inductive
Rated input/output voltage and range: 220/380 V, 230/400 V, 0.85Un–1.1Un
Rated mains frequency and range: 50 Hz / 45–55 Hz, 60 Hz / 55–65 Hz
Power connection: 3L + N + PE
Teljes áramharmonikus torzítás: <3% névleges teljesítménynél
DC áram injektálás: <0,5% In
Impact
Maximum efficiency: 98.50%
European efficiency: 98.0%
MPPT efficiency: >99%
Export
Dimensions: 448 × 688 × 270 mm
Weight: 46 kg
Display: LCD + LED
Inverter topology: non-isolated
Overvoltage category: OVC II on the DC side, OVC III on the AC side
Cooling type: smart air cooling
Noise level: ≤55 dB
Environmental data
Operating temperature range: between -40 °C and +60 °C
Power reduction: above +45 °C
Permissible ambient humidity: 0–100%
Permitted installation altitude: 3,000 m
Protection level: IP65
Communication and System Integration
Communication interface: RS485 / RS232 / CAN
Monitoring mode: GPRS / Wi-Fi / Bluetooth / 4G / LAN (optional)
Protection functions
DC reverse polarity protection
AC output overcurrent protection
Heat protection
AC output surge protection
AC Output Short-Circuit Protection
DC Component Monitoring
Arc fault circuit interrupter: optional
Protection against islanding
DC Switch
Insulation Impedance Detection
Residual Current Detection
Surge protection level: TYPE II on the DC side, TYPE II on the AC side
Standards
Power standards: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G99, VDE-AR-N 4105
Safety / EMC Standards: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
