Sigen EVAC 11 4G T2SH WH

Item number: C00696

Warranty: 3 years

The Sigen EVAC 11 4G T2 WH is an 11 kW AC electric car charger with a Type 2 socket. It is designed for outdoor use (IP65, IK10) and charging can be controlled in several modes: timing, charging from surplus solar energy, and fast charging are supported. Dynamic load management is also available to avoid overload (Sigen Power Sensor required), and installation is made easy with top/bottom/rear cable entry options. The device also supports dynamic pricing and Sigen AI mode for smarter scheduling.

Key benefits

• 100% green energy charging with Sigenergy's home energy solution
• IP65 and IK10 protection, worry-free outdoor use, simple operation and maintenance
• Dynamic load management to prevent overload, user-friendly charging
• Simple installation, fewer steps, with top/bottom/rear cable connection options
• Dynamic pricing and Sigen AI mode support for smarter scheduling

Technical data

• Nominal charging power: 11 kW
• Nominal output voltage: 220–240 / 380–415 V
• Network connection: 3 phases + N + PE (3W+N+PE)
• Output current range: 6–16 A
• Nominal AC frequency: 50/60 Hz
• AC power cable cross-section range: 2.5–6.0 mm²
• Vehicle connection: Type 2 socket with touch protection lock 

Protection and security

• Integrated RDC-PD fault current detection: AC 30 mA + DC 6 mA
• Flame resistance rating: UL94-5VB
• Safety protections: OVP, UVP, OCP, OTP
• PEN protection: supported
• Random charging delay: supported
• Ground fault protection: supported
• Surge protection: supported
• Grounding system: TT, TN, IT

Treatment, communication, integration

• Protocol: RS485, Modbus RTU
• Communication: 4G / WLAN / Fast Ethernet
• Identification: RFID card / application / Auto-charge (without authentication)
• Feedback/control: LED indicator light/application
• Measurement: external meter with RS485 / integrated meter IC
• OCPP protocol: OCPP 1.6J ED 2

Smart charging features

• Smart Schedule: scheduling of charging time, frequency, and operating mode; switching between PV surplus charging and fast charging
• PV Surplus Charging: EV charging from PV surplus; with "Battery boost power" priority setting and "Battery cut-off SOC" setting
• Fast Charging: the system draws power from both the grid and PV simultaneously for the fastest charging possible; Battery Boost Charging is also supported
• Dynamic load management: supported (Sigen Power Sensor required)
• Phase change: supported
• PV surplus charging with third-party inverter: supported (Sigen Power Sensor required)

General information

• Dimensions (W / H / D): 234 / 384 / 139 mm
• Weight (case B / case C): 4.5 / 6.4 kg
• Storage temperature range: –40 to +70 °C
• Operating temperature range: –30 to +55 °C
• Relative humidity range: 5–95%
• Max. operating altitude: 4000 m
• Cooling: natural convection
• Protection class: IP65
• Installation: wall mountable
• Application environment: outdoor / indoor
• Készenléti sajátfogyasztás: < 3,6 W
• Cable entries: bottom, top, and rear

Standards and compliance

• CE compliance
• Relevant standards: IEC 61851-1/IEC 61851-21-2, IEC 62196-2, IEC 62955, IEC 60364-7-722, IEC 61439-7, IEC 61000-6-1/-2/-3/-4