Sigen Hybrid 6.0 SP2

Item number: C00650

Guarantee: 10 years

The Sigen Hybrid 6.0 SP2 is a single-phase hybrid inverter from Sigenergy that provides 6.0 kW of nominal AC output power and can be connected to both solar (PV) and battery systems. The device is battery-ready for future expansion, uses fanless (natural convection) cooling, and has an IP66 protection rating.

Key benefits

• Prepared for battery for future expansion
• Slim design, smaller installation space requirements
• Fanless design: high performance, quiet operation
• IP66 protection rating for worry-free use

Technical data

DC input (PV side)

• Maximum PV power: 12000 W
• Maximum DC input voltage: 600 V
• Nominal DC input voltage: 350 V
• Starting voltage: 100 V
• MPPT voltage range: 50–550 V
• Number of MPP followers (MPPT): 2
• Number of PV strings per MPPT: 1
• Maximum input current per MPPT: 16 A
• Maximum short-circuit current per MPPT: 22 A

Battery connection

• Battery controller models: SigenStor BC
• Battery module models: SigenStor BAT series
• Number of modules per controller: 1–6
• Battery module voltage range: 300–600 V

AC output – mains power supply

• Nominal output power: 6000 W
• Maximum apparent power: 6600 VA
• Nominal output current: 27.3 A
• Maximum output current: 30.0 A
• Nominal output voltage: 220 / 230 / 240 V
• Nominal mains frequency: 50 / 60 Hz
• Power factor: 0.8 capacitive – 0.8 inductive
• Teljes áramharmonikus torzítás (THDi): < 3%

AC output – backup operation

• Peak power (10 seconds): 9000 W
• Nominal output voltage: 220 / 230 / 240 V
• Nominal output frequency: 50 / 60 Hz
• Power factor: 0.8 capacitive – 0.8 inductive
• Teljes feszültségharmonikus torzítás (THDi): < 3%
• Standby power switchover interruption time: 0 ms

Impact

• Maximum efficiency: 98.6%
• European efficiency: 98.3%

Built-in protection

• DC reverse polarity protection
• Insulation supervision
• Residual current monitoring
• Arc Fault Circuit Interrupter (AFCI)
• AC overcurrent, overvoltage, and short-circuit protection
• Type II DC/AC surge protection
• Anti-islanding protection

General information

• Dimensions (W × H × D): 373 × 473 × 99 mm
• Weight: 11.5 kg
• Storage temperature range: -40 to 70 °C
• Operating temperature range: -30 to 60 °C
• Relative humidity: 0–95%
• Maximum installation altitude: 4000 m
• Cooling: natural convection
• Protection rating: IP66
• Communication: WLAN / Fast Ethernet / RS485 / Sigen CommMod (4G/3G/2G)
• Installation: wall mountable
• Nighttime consumption: 2.5 W
• Noise level: 25 dB